Manual guillotines IDEAL for paper
IDEAL Guillotine 3005 - Manual Cutting length 300 mm Cutting height 5.5 mm Minimum cut 45 mm Table depth 300 mm
Ideal 3005 Manual Guillotine - cut length 300 mm
Compact and portable manual guillotine, with a paper cutting length of up to 300 mm and a table depth of 300 mm. Precise cutting of up to 55 sheets of 70g/m2.- German manufacture.
– Transparent safety flap of the cutting area.
– Luminous LED to display the cutting area
– Three set points on the table for DIN A5, B5 and A4 formats.
– Millimeter scale
– Non-slip rubber legs
– High quality of the components.
– Non-slip rubber legs.
Cutting length: 300 mm
Cutting height: 5.5 mm
Table depth: 300 mm
Minimum cut: 45 mm
IDEAL Guillotine 4300 - Manual Cutting length 430 mm Cutting height 20 mm Minimum cut 36 mm Table depth 340 mm
Manual Guillotine IDEAL 4300 - length cut 430 mm-:
Manual guillotine with a paper cutting length of up to 430 mm and a
table depth of 340 mm- German manufacture.
– Long-lasting metal construction.
– High quality of electro mechanical components.
– Safety device / blade lock.
– Easy rotation/change of the square from the side,
– Solid steel blade holder.
– Solid piston with manual lever.
– High quality resharpenable blades made of “Solingen steel”.
– Rear bracket with manual crank.
– Metric scale (mm and inches).
Cutting length: 430 mm
Cutting height: 20 mm
Table depth: 340 mm
Minimum cut: 36 mm
IDEAL Guillotine 4705 - Manual Cutting length 475 mm Cutting height 70 mm Narrow cut 30 mm Table depth 455 mm
Manual Guillotine IDEAL 4705 - length cut 475 mm-:
Manual guillotine with a cutting length of 430 mm and a tabletop depth of 435 mm (up to DIN A3)
– Safety Cutting System “SCS”:
Oscillating safety lid on the front table (with automatic locking during the cutting action); transparent safety lid on the rear table; blocking of the blade in the upper position; easy change of the blade from the front of the machine, without having to remove the caps; blade change device with edge protection; blade depth adjustment from the outside of the machine; easy turning and/or changing the square from one side of the machine.
– High quality blade.
– Solid steel blade holder.
– Solid piston with manual steering wheel.
– Solid all-metal construction.
– Rear bracket with manual crank.
– Metric scale (mm/inch) on the front table.
– The machine is desktop.
– Support table available – accessory of additional cost-
– Color: light gray
Cutting length: 475 mm
Cutting height: 70 mm (up to 500 sheets of 70g/m2)
Table depth: 455 mm
Minimum cut: 30 mm
IDEAL Guillotine 4305 - Manual Cutting length 430 mm Cutting height 40 mm Narrow cut 34 mm Table depth 435 mm
Manual Guillotine IDEAL 4305 - length cut 430 mm-:
Manual guillotine with a cutting length of 430 mm and a tabletop depth of 435 mm (up to DIN A3)
Safety Cutting System (SCS):
Oscillating safety lid on the front table (with automatic locking during the cutting action); transparent safety lid on the rear table; blocking of the blade in the upper position; easy change of the blade from the front of the machine, without having to remove the caps; blade change device with edge protection; blade depth adjustment from the outside of the machine; easy turning and/or changing the square from one side of the machine.
– High quality steel blade “Solingen”.
– Solid steel blade holder.
– Patented fastening system.
– Side stop with metric scale (mm and inches).
– Precise adjustment of the rear bracket by
the calibrated manual crank.
– Solid all-metal construction.
– The machine is desktop.
– A support table is available as an accessory
Color gray light
Cutting length: 430 mm
Cutting height: 40 mm (up to 500 sheets of 70g/m2
Table depth: 435 mm
Minimum cut: 34 mm
