Polyethylene retention buckets
Collector buckets, IBC storage:
Completely protected against corrosion. Available with surface area of
support in polyethylene similar to a pallet. Palletizing for easy transport
Certified and insured
– Suitable for the storage of polluting liquids from aquifers
– General Construction Approval / Declaration of Conformity (ÜHP)
– Limit load of up to 1,400 kilograms per support surface and according to
the KTC/IBC’s own weight
– Suitable for liquids with a maximum specific weight of 1.4 tons.
 |  | |
Ref. | Volume Collected | Size. – anc x prof x alt (mm)- | Capacity Charging | Weight approx |
| Retention cube 15477 | 1,100 l. | 1430 x 1430 x 970 | 1,600 kg | 105 |
| Retention cube 15479* | 1,100 l. | 2280 x 1430 x 720 | 1,600 kg | 180 |
| Retention cube 15480 | Idem 15479 + 2 PE support surfaces | |||
* Does not include support surface
Collector buckets, IBC storage:
Completely protected against corrosion. Available in version with racking area to small containers. IBC stand with side safety edges,
that prevents the container from sliding
Certified and insured
– Suitable for the storage of polluting liquids from aquifers
– With General Construction Approval / Declaration of Conformity (ÜHP)
 |  |  |
|
Ref. |
Media
Size
– anc x prof x alt (mm)- |
Capacity
Charging |
| Cubeto ret. 13054* |
1400 x 1600 x 755 |
2,000 kg/m2 |
| Cubeto ret. 13055** |
1400 x 1830 x 755 |
2,000 kg/m2 |
PolyB and PolyB-C Polyethylene containers:
Container with liftable lid transportable with forklift
Available in 4 colors.
Broken-molded and completely watertight.
Ref. | Capacity. | Size. anch x prof x alt (mm) | Several |
| PolyB polyethylene containers | 405 l. | 1240 x 840 x 915 | |
| PP2 Retention Cube | 405 l. | 1220 x 820 x 330 | with wheels (watertight) |
IBC container with plastic pallet 1000L:
For safe storage and transport according to regulations
– High density polyethylene (HDPE) containers with UV stabilizer for outdoor storage
– Wrap with high stability steel profile as an additional safety measure for transport
– Filling opening of ø 150 mm with screw cap
– Opening of inlet and outlet of liquids for sealing
– Integrated discharge faucet (gasket material: Viton – it is recommended to check the resistance of the material to the transfer liquid by checking the safety data sheets of the medium!)
– Large board for inscriptions
– Transportable from all 4 sides
– Volume : 1000 liters
– Dimensions L x W x H : 1000 x 1200 x 1175 mml
IBC container with wooden pallet 1000L -standard-:
For safe storage and transport according to current regulations
– Containers in high density polyethylene HDPE of great resistance, with
UV stabilizer for outdoor storage
– Coating in steel profile of great stability as a protection
additional in case of transport.
– Filling opening ø 150 mm with screw cap
– Opening of filling and sealed emptying
– Integrated output faucet and ø 48 mm output arc
– Large signage board
– Transportable on all 4 sides
– Volume : 1000 Liters
– Dimensions L x B x H : 1000 x 1200 x 1175 mm
– Includes
– Extension of drainage for IBC’s
– Length approx. 250 mm
– Diameter approx. 50 mm
Retention buckets for drums:
Retention buckets from 1 to 8 drums of 200 liters.
– Compatible with all liquids used in the graphic industry [
Consult >>>
]
– Easy to clean thanks to the removable grid.
– Incorporate holes for handling with forklifts (except PP1).
– Lightweight, they facilitate their manipulation.
Ref. | Capacity. | Size. – anc x prof x alt (mm)- | Retention – Liters- |
| PP1 Retention Cube | 1 x 200 l. | 900 x 700 x 525 | 225 |
| PP2 Retention Cube | 2 x 200 l. | 1220 x 820 x 330 | 240 |
| PP2HD Retention Cube | 2 x 200 l. | 1290 x 875 x 345 | 250 |
| PP3 Retention Cube | 3 x 200 l. | 1785 x 780 x 24 | 228 |
| PP4 Retention Cube | 4 x 200 l. | 1310 x 1310 x 370 | 410 |
| PP4L retention cube | 4 x 200 l. | 1280 x 1280 x 27 | 230 |
| PP8 Retention Cube | 8 x 200 l. | 2560 x 1350 x 510 | 1140 |
Retention Buckets for Cubicon holders
Steel safety cabinets for under the counter:
Retention buckets for 1 or 2 cubicon holders.
– Compatible with all liquids used in the graphic industry [Consult >>>]
– Easy to clean thanks to the removable grid.
– Lightweight, they facilitate their manipulation.
– They incorporate holes for handling with forklifts.
– Optional PIBC2T tray. In case of leaving the valve open, the liquid would be poured into the bucket.
|
Ref. |
Description |
Size.
– anc x prof x alt (mm)- |
Retention
– Liters- |
| PIBC withholding cube |
1 IBC |
1760 x 1350 x 710 |
1100 |
| PIBC2 withholding cube |
2 IBCs |
2550 x 1360 x 510 |
1140 |
| PIBCD withholding cube |
1 IBC with tray |
1955 x 1410 x 735 |
1100 |
| PIBC2T withholding cube |
Tray for PIBC2 |
450 x 515 x 830 |
86 |
