Color densitometers (reflection)

Digidens T6CR Densitometer

Color densitometer for paper and film – reflection and transmission –

[ Price + Quality + Optimum Features]

It allows simple but precise measurements, both on film (for transmission) and on black and white prints (reflection).

Transmission mode : measure

1. 1. 1. – Density
      2. – Point percentage

Reflection mode automatically recognizes each color and measures

1. 1. 1. – Density
      2. – Percentage/Point Increase
      3. – Density of primary and secondary colors
      4. – Density difference

Other measurements:

1. 1. 1. – Measurement of color differences in dE
      2. – It is specially used in the printing of Pantone colors or direct colors where a decomposition in CMYK is not possible.

The DigiDens T6CR densitometer is accurate and reliable at a low price. Robust and compact design; does not require maintenance.

It has a large display to show the information and its interface is easy to use ! It only has three buttons!

The DigiDens T6CR denistometer is portable, battery-powered, comfortable to hold in one hand, and can be carried in your pocket.

Allows optional RS23 serial input, for connection to the PC.

DIGIDENS T6CR
Transmission density range equivalent to> 120dB	> 6.0D
Transmission density deviation (D< 5)	±0.02D
Transmission percentage deviation	±0.5%
reflection density	> 2.5D
Reflection Color Density Deviation	±0.02D
Reflection Color Percentage Deviation	±1%
Number of measurements per battery set
– Transmission mode	Approx. 200,000
– Reflection mode	Approx. 50,000
Input voltage	2.8 – 5.0 volts
– Battery type	3×1.5V
– Rechargeable battery type	3×1.2V
Measuring point diameter	2.5mm
Transmission density range equivalent to> 120dB	> 6.0D

DIGIDENS T6R
Transmission B/W Density Range	> 5.0D
Repeatability in transmission B/W density	±0.01D(D< 5)
Transmission B/W Deviation Percentage	±0.5%
Density range B/W reflection	> 2.5D
Repetition density B/W reflection	±0.01D(D< two)
Reflection B/W Deviation Percentage	±0.5%
Reflection Color Density	> 2.5D
Repeatability in reflection color density	±0.01D(D< two)
Reflection Color Deviation Percentage	±0.5%
polarizing filter	2 x linear
Number of measurements per battery pack
> transmission mode	Approx. 200,000
> reflection mode	Approx. 50,000
type of batteries	3×1.5V
Rechargeable battery type	3×1.2V
Measuring point diameter	2.5/3.2mm
Repeatability in transmission B/W density	±0.01D(D< 5)
Transmission B/W Deviation Percentage	±0.5%

The density range is greater than D 2.5. Repeatability exceeds D 0.01. The display mode allows to jump from density, percentage and color difference (dE) mode.

As a differential characteristic, this densitometer measures transmission b/w film.