Mitika 3246 Manual Shrink Wrapper

THE SMALLEST BELL SHRINK WRAPPER,
WITH THE MOST ADVANCED SHRINK WRAPPING TECHNOLOGY

It has an advanced control system with multifunction, all under electronic control (second generation card). It allows automatic adjustment of welding time based on production speed.

It allows retraction after sealing, which allows the use of retractable polypopylene to obtain a “second skin” that protects more, prevents shrinkage and improves the presentation of the product.

Possibility to raise the hood after the fan has stopped.

It has an automatic counter of reserve units and energy saving mode (Standby).

1.- Placement of the coil. 2.- Insertion of the film inside the loading table. 3.- Start-up of the shrink wrapping machine. 4.- Selection of shrink wrapping programs: 8 programs available + 1 machine performance. 5.- Parameterization of manufacturing functions – Welding time – Retraction time – Temperature – Production count (Reset button) 6.- Test of use.

SPECIFICATIONSMITIKA 3246
Power supply220 V – 1 Ph
Maximum power required2.5 KW
Machine dimensions: ( L x W x H )870 x 560 x 440 mm
Machine weight38 kg
Sealing area ( W x L )320 x 460 mm
Maximum product height200 mm
Maximum roll dimensions (DIA x W)250 x 400 mm
Impulse sealing systemLower blade
Exit4 – 6 pieces / min
Note: technical characteristics are subject to change without notice

To guarantee a better result, a safer process, compliance with current legislation and better conservation of the machine, we advise using film marketed by Controlgraf.

Machine manufactured in accordance with EEC standards

Manual shrink wrapper 3246 EVX / 4255 EVX

THE VANGUARD OF SHRINK WRAPPING MACHINES: EXCELLENT PERFORMANCE AND LOW CONSUMPTION. THE MOST ADVANCED TECHNOLOGY, SMALL SIZE AND EASY HANDLING

The most innovative line of one-step thermo-retractable wrapping!

  • Fully electronic control (second generation control panel)
  • Automatic adjustment of the sealing time according to the production speed
  • Possibility of shrinkage of wrapping when sealing is completed (sometimes useful with polyolefin films)
  • Option to release the hood once the fan has stopped
  • Automatic stand-by mode for energy saving
  • Gas spring for opening the hood
  • Unit Counter
  • Optional: Production waste collection system
Standard
TECHNICAL FEATURES3246 EVX4255 EV
Maximum welding area L x W 320 x 460 mm 420 x 550 mm
Bottom Sheet Welding System
Magnetic Self-ReturnSystem
Programs 8
Standard Counter
Supply voltage 220 V- 1 Ph 220 V- 1 Ph
Installed power 2.1 KW 3 KW
Consumption 1.4 KW/h 1.9 KW/h
Machine dimensions 1085 x 650 x 550 mm 1235 x 750 x 620 mm
Working table height 920 mm 920 mm
otas: technical characteristics are subject to change without notice

Machine manufactured in accordance with EEC standards

Note: technical characteristics are subject to change without notice

To guarantee a better result, a safer process, compliance with current legislation and better conservation of the machine, we advise using film marketed by Controlgraf.

Machine manufactured in accordance with EEC standards

HEALTHY FOR
THE ENVIRONMENT
AND FOR THE POCKET !

Swing 4255 Manual Shrink Wrapper

THE FIRST BELL SHRINKTOR WITH A FULLY STRUCTURED
MADE OF TECHNOPOLYMER (in Baydur©, a high-tech plastic material from Bayer AG)

  • Fully electronic control of the duty cycle
  • Built-in digital control panel next to the hood
  • 8 possible memorizable operating programs
  • Possibility to trigger the retraction at the end of welding
  • Automatic regulation of welding time (the machine automatically adjusts the welding time in relation to the packing speed)
  • Maintenance system of the closure of the hood for the retraction time (adjustable)
  • Possible to leave the hood after the ventilation stops to eliminate the hot air outlet at the end of the cycle
  • Cooling system by thermostatation of the welding bars included
  • Stand-by function after a recordable usage time
  • Banknote included
  • Concave shape on the front side of the machine that improves working conditions (ergonomics)
  • The machine works with PVC (BLUE FILM), polyolefin film heat generators and eventually heat shrinks (GREEN FILM – GOLDEN FILM)

To guarantee a better result, a safer process, compliance with the current leguislation and a better conservation of the machine, we recommend using film marketed by Controlgraf.

Machine manufactured in accordance with EEC standards

TECHNICAL CHARACTERISTICSSWING 4255
Supply voltage240 V — 1 PH
Installed power3.5 kW
Machine dimensions L x W x H1250 x 800 x 640 mm
Work table height930 mm
Machine weight75 kg
Welding dimensions L x W420 x 550 mm
Maximum product height250 mm on request
Welding systemlower blade
Maximum coil length DIA x W250/600 mm
Productivity200/400 pc/h

Note: Technical characteristics are subject to change without notice.

Manual retraction machine with automatic output Evolution 4255 SA EV

Only one operator is needed. The shrink wrapping is manual but, once the hood is opened, the product comes out automatically thanks to a conveyor belt in stainless steel mesh.

Heat shrinkage systems, a simplified technology with duty cycle; the best performance to manufacture more.

  • Completely electronic control of the duty cycle, with second generation card.
  • Automatic regulation of welding time in relation to packing speed.
  • Supports up to 8 memorizable operating programs.
  • Stand by function when detecting inactivity of the shrink wrapping machine.
  • Possibility of activating the retraction at the end of welding.
  • Lock maintenance system of the hoods during the retraction time (adjustable).
  • Start control cycle to medium proximity switch.
  • Possible to leave the hood after the ventilation stop to eliminate the hot air outlet at the end of the cycle.
  • External tilting roller with crazy rolls, movable in many positions according to the height and measurements of the product.
  • The ready-made product slides only out of the retraction welding zone.
  • Waste cart on request.
  • External roller to accelerate the output of products.
  • Automatic output tape in stainless steel mesh, controlled by a timer and adjustable in height.
  • Vacuum cleaner with active carbon filter as standard.
  • Patented system of removing the film from the welding bars after retraction through an automatic spring of the tape.
  • Banknotes
  • Opening system of the hood through gas spring.
  • The machine works with PVC (BLUE FILM), polyolefinic film heaters and eventually thermotractile (GREEN FILMGOLDEN FILM).

Machine manufactured according to CE standards

TECHNICAL CHARACTERISTICSSWING 4255
Supply voltage240 V — 1 PH
Installed power3.5 kW
Machine dimensions L x W x H1250 x 800 x 640 mm
Work table height930 mm
Machine weight75 kg
Welding dimensions L x W420 x 550 mm
Maximum product height250 mm on request
Welding systemlower blade
Maximum coil length DIA x W250/600 mm
Productivity200/400 pc/h

Note: Technical characteristics subject to variations without prior notice.
Productivity depends on the operator and type of shrink-wrapped product.

Manual Shrink Shrink Machine 6084 EV

MANUAL SHRINK SHRINKTOR “GIANT” OF BELL FOR THERMORETRACTIONAL MAKING. GREAT NOT ONLY IN DIMENSIONS, GREAT IN PRODUCTION AND PERFORMANCE.

Controlgraf presents the “BIG”: this 6084 EV and the 85130 EV, the largest in the range.

A thermo-tractor-making machine with simplified technology, designed to respond to the growing demand in size and performance.

A manual shrink shrink machine that supports longer uptime for more sustained productions.

Ideal for making products of very wide dimensions, such as paintings, panels, light panels, blackboards, etc.

Equipped with a double magnetic device for closing the hood during the shrink wrapping cycle, during which the operator has his hands free to prepare the successive piece to be made.

They are also equipped with a double fan for better air circulation during the retraction of the film.

The machine works with PVC (BLUE FILM), heat-welding polyolefinic film and thermo-shrink film. (GREEN FILM – GOLDEN FILM)

SPECIFICATIONS6084
Supply voltage380 V – 3 Ph
Installed power7 KW
Machine dimensions L x W1940 x 950 mm
Work table height920 mm
Machine weight180 kg
Welding dimensions L x W600 x 840 mm
Maximum product height200 mm
Welding systemlower slat
Maximum coil length DIA x W250 x 800 mm
Productivity4 – 8 pcs/min

Note: Technical characteristics subject to variations without prior notice.
Productivity depends on the operator and type of shrink-wrapped product.

Manual Shrink Shrink Machine 6084 EV

MANUAL SHRINK SHRINKTOR “GIANT” OF BELL FOR THERMORETRACTIONAL MAKING. GREAT NOT ONLY IN DIMENSIONS, GREAT IN PRODUCTION AND PERFORMANCE.

Controlgraf presents the “BIG”: this 6084 EV and the 85130 EV, the largest in the range.

A thermo-tractor-making machine with simplified technology, designed to respond to the growing demand in size and performance.

A manual shrink shrink machine that supports longer uptime for more sustained productions.

Ideal for making products of very wide dimensions, such as paintings, panels, light panels, blackboards, etc.

Equipped with a double magnetic device for closing the hood during the shrink wrapping cycle, during which the operator has his hands free to prepare the successive piece to be made.

They are also equipped with a double fan for better air circulation during the retraction of the film.

The machine works with PVC (BLUE FILM), heat-welding polyolefinic film and thermo-shrink film. (GREEN FILM – GOLDEN FILM)

SPECIFICATIONS6084
Supply voltage380 V – 3 Ph
Installed power7 KW
Machine dimensions L x W1940 x 950 mm
Work table height920 mm
Machine weight180 kg
Welding dimensions L x W600 x 840 mm
Maximum product height200 mm
Welding systemlower slat
Maximum coil length DIA x W250 x 800 mm
Productivity4 – 8 pcs/min

Note: Technical characteristics subject to variations without prior notice.
Productivity depends on the operator and type of shrink-wrapped product.

Manual Shrink Machine 85130

NEW MANUAL SHRINKTOR “GIANT” BELL. THE LARGEST IN TAILORING MEASURES,

IN PRODUCTION CAPACITY AND PERFORMANCE.

The great novelty in “extra-large” shrink shrink machines. Able to give a winning response to the new demands of confection. Large by size and production capacity, to which we must add its high performance.

Ideal for making products from large surfaces such as paintings, light ceilings, panels, etc.

A successful solution that covers the widest field when it comes to product dimensions. Like the 6084 EV, it has a double bell lock device during retraction and a double fan, for better air circulation during film retraction.

The machine works with PVC (BLUE FILM), heat-welding polyolefinic film and thermo-shrink film. (GREEN FILM – GOLDEN FILM).

Machine manufactured according to CE standards

TECHNICAL CHARACTERISTICS85130
Supply voltage400 V – 3 Ph + N
Installed power8 KW
Machine dimensions L x W2700 x 1500 mm
Work table height900 mm
Machine weight300 kg
Welding dimensions L x W850 x 1300 mm
Maximum product height200 mm
Welding systemlower slat
Maximum coil length DIA x W250 x 1200 mm
Productivity4 – 8 pcs/min

Note: Technical characteristics subject to variations without prior notice.
Productivity depends on the operator and type of shrink-wrapped product.